{{ $t('shop.all.spaetbestellservice.hinweis') }}
Fastening type |
on connection plate, Permanently screwed |
Product weight [g] | 2.000 |
Display | Seven segment display |
Operating element | Dip switch |
Permission |
BIA, C-tick, c UL us - Listed (OL) |
CE certificate (see declaration of conformity) |
to EU EMC directive, to EU machinery directive |
Certified awarding point | BG MFS 09031 |
Bearing temperature [°C] | -25 to 70 |
ambient temperature [°C] | 0 to 50 |
Relative humidity |
0 - 90 %, Not condensing |
Protection category | IP20 |
Degree of contamination | 2 |
Material information | RoHs compliant |
Nominal current load supply [A] | 8 |
Peak current load supply [A] | 12 |
Network filter | integrated |
Nominal voltage load supply DC [V] | 48 |
Max. intermediate circuit voltage DC [V] | 58 |
Braking resistance [Ohm] | 17 |
Impulse power braking resistance [kVA] | 0,5 |
Nominal voltage logic supply DC [V] | 24 |
Permitted range logic voltage | ± 20 % |
Nominal current logic supply [A] | 0,2 |
Output voltage range AC | 0 V up to input voltage |
Max. peak current duration [s] | 2 |
Output frequency [Hz] | 0 to 2000 |
Max. length motor line without ext. network filter [MTR] | 25 |
Operating mode controller | PWN, MOSFET power end level |
Operating mode | Microstep, >4000 steps/rotation |
Adjustable current lowering | Via software |
Step setting | Via software |
Protection function |
I²t monitoring, Drag error monitoring, Voltage blackout detection, Current monitoring, Temperature monitoring |
Nominal current setting | Via software |
Max. step frequency [kHz] | 4 |
Parameterising interface | RS232 (9600 / 115000 S) |
Fieldbus coupling |
CANopen, Profibus DP |
Bus connector |
Sub-D, 9 pin, Plug |
Bus closing resistance | integrated |
Rotor position transducer | Encoder |
Position transducer | Encoder |
Encoder output interface, function | Target value for downstream switched slave actuator |
Encoder input interface, properties | RS422 |
Encoder input interface, function | In synchronous mode as a speed preset of the slave actuator |
Properties digital logic outputs |
Partially freely configurable, Not galvanically separated |
Max. current digital logic outputs [mA] | 100 |
Quantity analogue target value inputs | 1 |
Work area target value input | ± 10 V |
Impedance target value input [kOhm] | 20 |
Quantity analogue monitor outputs | 1 |
Work area monitor outputs | ± 10 V |
Safety function | Safe switched off torque (STO) |
Performance Level (PL) | Safe Torque off (STO) / category 3, Performance Level d |
{{ $t('shop.all.gewicht') }} | 2.000 g / pcs |
{{ $t('shop.display.artikel.zollwarennummer') }} | 85044085 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
An error has occurred, please reload this page and try again.